ORI-REVO: A Design Tool for 3D Origami of Revolution

回転体ベースの立体折紙設計ツール

2011 Jun Mitani, Univ. of Tsukuba



The latest version is Ver.1.0.1.

Contents (目次)

Updates (更新情報)



[2011/3/8]

[2011/3/6] This webpage was opened. (Webページ開設) [2011/6/3] Ver1.0.1 was released.[2011/3/8] Importing point-list (点列データの読み込み) section was added.[2011/3/6] This webpage was opened. (Webページ開設)

Introduction (はじめに)

Requirements (動作環境)

OS: Windows8/7/Vista, MacOS X

Java: Java5 or higher



License (使用条件)

You can use this application for personal purposes only.

Use in commercial projects and redistribution are not allowed without author's permission.

The author will not bear any responsibility for any loss or risk resulting from this application.

This application uses JOGL1.1 library for displaying a 3D model. Please refer LISENSE-JOGL-1.1.1.txt (included in the downloaded file) about the license of JOGL.

Please feel free to contact to: mitani (at) cs.tsukuba.ac.jp



本アプリケーションは個人使用に限定します。

作者の許可を得ずに、再配布、および商用目的での使用はできません。

本アプリケーションを使用することによって生じたいかなる損害についても作者は責任を負いません。

本アプリケーションは、3Dモデル表示にJOGL1.1ライブラリを使用しています。JOGLの使用許諾については、ダウンロードしたファイルに含まれるLISENSE-JOGL-1.1.1.txtを参照してください。

不明な点は mitani (at) cs.tsukuba.ac.jp 宛てにお問い合わせください。

Install and Start Up (インストールと起動)

Windows



ORI-REVO starts by double-clicking startup.bat file.



インストーラはありません。下のリンクからzipファイルをダウンロード後、任意のフォルダで解凍してください。解凍後に含まれる startup.bat をダブルクリックするだけで起動します。



ORI-REVO Ver.1.0.1 for Windows (32bit): ori-revo-v101-win-32bit.zip

ORI-REVO Ver.1.0.1 for Windows (64bit): ori-revo-v101-win-64bit.zip

(old version) ORI-REVO Ver.1.0.0 for Windows :



起動しない場合は、Javaの実行環境がインストールされていることを確認してください。

JDK8は



※ 研究用に開発したソフトウェアであり、動作保証はしておりません。申し訳ありませんが、起動方法や動作のトラブルに関する個別の問い合わせには回答できません。

There is no installer. Download a zip file through the following link. Then unzip the file.ORI-REVO starts by double-clickingfile.インストーラはありません。下のリンクからzipファイルをダウンロード後、任意のフォルダで解凍してください。解凍後に含まれるをダブルクリックするだけで起動します。(old version) ORI-REVO Ver.1.0.0 for Windows : ori-revo-v100-win.zip 起動しない場合は、Javaの実行環境がインストールされていることを確認してください。JDK8は こちら からダウンロードできます。

Mac OS



ORI-REVO starts by double-clicking ori-revo-v101.jar file.



下のリンクからzipファイルをダウンロード後、任意のディレクトリで解凍してください。解凍後に含まれる ori-revo-v101.jar をダブルクリックするだけで起動します。



ORI-REVO Ver.1.0.1 for MacOSX : ori-revo-v101-mac.zip

(old version) ORI-REVO Ver.1.0.1 for MacOSX :

Download a zip file through the following link. Then unzip the file.ORI-REVO starts by double-clickingfile.下のリンクからzipファイルをダウンロード後、任意のディレクトリで解凍してください。解凍後に含まれるをダブルクリックするだけで起動します。(old version) ORI-REVO Ver.1.0.1 for MacOSX : ori-revo-v100-mac.zip

Update History

[Ver1.0.1]

- Undo feature was added.

- Known bugs were fixed.

- It became possible to specify the finished size.

[Ver1.0.0]

- First release.



Usage (使用方法)



The usage of ORI-REVO is simple.

The main operation is just inputting a polyline on the main window by left click. 3D model and the crease pattern are updated in real-time.

The crease pattern is exported to a DXF file (a vector file compatible with Adobe Illustrator) or a PNG file (a raster image) through [File] menu.

[Show Manual] check box displays instructions for editing the input 2D polyline.

The effects of other parameters on the control panel are reflected to the 3D model and the crease pattern immediately. Please try to change parameters. You will soon find the purposes of them.

Some sample data as shown in the above image are included in the sample folder.



ORI-REVO の使い方はとても簡単です。

主な操作は、メイン画面でマウスをクリックして、折り線を入力するだけです。 3Dモデルと展開図がリアルタイムで更新されます。

展開図は、Adobe Illustratorで読み込むことができるDXF形式、またはPNG画像の形式で保存できます。

入力した折り線の編集方法は[Show Manual]チェックボックスをチェックすると表示されます。

コントロールパネル上の他のパラメータは、変更と同時に3Dモデルと展開図に反映されるので、いろいろ試してみてください。

sampleフォルダには上記のイメージのサンプルが含まれています。

The usage of ORI-REVO is simple.The main operation is just inputting a polyline on the main window by left click. 3D model and the crease pattern are updated in real-time.The crease pattern is exported to a DXF file (a vector file compatible with Adobe Illustrator) or a PNG file (a raster image) through [File] menu.[Show Manual] check box displays instructions for editing the input 2D polyline.The effects of other parameters on the control panel are reflected to the 3D model and the crease pattern immediately. Please try to change parameters. You will soon find the purposes of them.Some sample data as shown in the above image are included in thefolder.ORI-REVO の使い方はとても簡単です。主な操作は、メイン画面でマウスをクリックして、折り線を入力するだけです。 3Dモデルと展開図がリアルタイムで更新されます。展開図は、Adobe Illustratorで読み込むことができるDXF形式、またはPNG画像の形式で保存できます。入力した折り線の編集方法は[Show Manual]チェックボックスをチェックすると表示されます。コントロールパネル上の他のパラメータは、変更と同時に3Dモデルと展開図に反映されるので、いろいろ試してみてください。sampleフォルダには上記のイメージのサンプルが含まれています。





Importing point-list (点列データの読み込み)



The x and y coordinates of points should be listed sequentially in the file as this example (

The extension should be .polyline.

It is preferable that the points are in (-200, -200)-(200,200) square area.



ORI-REVOは、外部ファイルからテキスト形式で記述された点列情報を読み込むことができます。読み込むことができるファイルは、こちらのサンプル( ORI-REVO can import point-list data from an external text file.The x and y coordinates of points should be listed sequentially in the file as this example ( example.polyline ).The extension should be .polyline.It is preferable that the points are in (-200, -200)-(200,200) square area.ORI-REVOは、外部ファイルからテキスト形式で記述された点列情報を読み込むことができます。読み込むことができるファイルは、こちらのサンプル( example.polyline )のように、各点のx座標値とy座標値が列挙されている必要があります。また、ファイルの拡張子は.polylineである必要があります。各点は、(-200, -200)-(200,200)の正方形に収まるようにします。

Making movie (制作風景)

Books published in Japan (書籍)

Links (関連ページへのリンク)

Contact (問い合わせ)

Jun Mitani, University of Tsukuba, Department of Computer Science

三谷 純, 筑波大学システム情報工学研究科コンピュータサイエンス専攻

mitani [at] cs.tsukuba.ac.jp