The Raspberry Pi line of mini computers -- including the all-new Pi Zero W -- are wonderful devices for what they are. Quite frankly, they have inspired many young people to learn about programming, while helping makers to create some really cool projects. With that said, the Pi computers are not the only System on a Chip solutions on the market. Actually, there are more powerful ARM-based offerings available. The problem? They are often radically more expensive than Raspberry Pi.

However, there is a new Raspberry Pi competitor that is quite affordable. In fact, some folks may view it as a Pi-killer. The $30 FriendlyElec NanoPi M1 Plus has an arguably superior design and layout, plus important integrated features like Wi-Fi and Bluetooth. It even has an IR receiver, onboard microphone, 8GB storage, and both power and reset buttons. Best of all? It is ready to run Debian, Ubuntu Core, and Ubuntu Mate from the start.

"The NanoPi M1 Plus is designed and developed by FriendlyElec for professionals, enterprise users, makers and hobbyists. It is only two thirds the size of a Raspberry Pi. FriendlyElec has made a Debian, Ubuntu-MATE, Ubuntu-Core and Android images ready for it," says FriendlyElec.

The company further says, "The NanoPi M1 Plus uses the Allwinner H3 Soc. It integrates Gbps Ethernet, IR receiver, video/audio output, WiFi & Bluetooth, onboard microphone and supports DVP/Camera/HDMI and CVBS. It has a serial debug port. Its GPIO pins are compatible with those of a Raspberry Pi."

FriendlyElec shares the following specifications.

CPU: Allwinner H3, Quad-core Cortex-A7@1.2GHz

GPU: Mali400MP2@600MHz，Supports OpenGL ES2.0

DDR3 RAM: 1GB

eMMC: 8GB

Wireless: 802.11 b/g/n

Bluetooth: 4.0 dual mode

Antenna Interface: Shared by WiFi and Bluetooth, IPX interface

Connectivity: 10/100/1000M Ethernet

Audio: 3.5mm jack/Via HDMI

Microphone: onboard microphone

IR: onboard IR receiver

USB Host: USB 2.0 x 3, 2 x USB Type A and 1 x 2.54mm pitch pin-header

MicroSD Slot: x1

MicroUSB: power input and data transmission, OTG

Audio Output: HDMI 1.4 1080P, CVBS

DVP Camera Interface: 24pin, 0.5mm pitch FPC seat

Serial Debug Port: 4Pin, 2.54mm pitch pin-header

GPIO: 40pin, 2.54mm pitch pin-header, compatible with Raspberry Pi 2's GPIO. It contains UART, SPI, I2C, I2S/PCM, SPDIF-OUT and IO

User Button: 1 x Power Button and 1 x Reset Button

LED: 1 x Power LED and 1 x System Status LED

PCB Dimension: 64 x 60 mm, ENIG

Power Supply: DC 5V/2A

OS/Software: u-boot, Debian, Ubuntu-MATE, Ubuntu-Core

Want to buy one for yourself? You can get it here. You shouldn't delay, however, as FriendlyElec says the $30 price is limited, and it will eventually cost more.

Do you think this is a Raspberry Pi 3 killer? Please tell me in the comments.