120mm Corsair HD120 RGB LED, 9 Blade, PWM, Static Pressure 12 LED Multi-Colour Fan Triple Pack with Controller, 4-pin is rated 4.8 out of 5 by 6 .

Rated 5 out of 5 by vMax23 from If you like RGB, then these are fantastic Bought this kit to go with a 360 mm radiator. installation was easy, though you now have 2 stes of cables coming from the fan, one to the hub and one the a fan connector on the motherboard. The hub and controller come with a some double sided tape to place anywhere in your system and can be hidden very well. The controller has three settings. 1 - Speed, 2 - Colour, 3 - Mode. All are fairly self explanitory but the mode allows for many different types of effects from fading, blinking, breathing and a new mode called sequential which is fantastic. The colours for the LED's are what stand out, with bright and fairly accurate colours. The fans themselves are up to Corsair's usual great standards and are more than quiet and have a great range all the way from 800 up to 1750rpm. Overall, well worth the money..

Rated 5 out of 5 by Shade619 from Excellent Bought these 120mm Corsair HD120 RGB LED fans kit with some doubt at first but there bright and really show up in all colours the light modes are nice but there is some that make it quite annoying but that may be the only thing bad that a can say the kit comes with every thing you need to get it up and running there pretty quiet even at full speed but obviously there`s noise at that speed if your looking for nice bright green or deep reds blue purple yellow white orange(tho its a bit weaker)than the other colours so be aware of that that said a cant recommend these enough also the price point was right on the money

Rated 5 out of 5 by aich69 from If you like RGB you'll love these. The usual Corsair high quality, this kit is an essential buy for all you RGB LED lovers. A nice compact control module with sockets for 6 fans that can be controlled from either the bundled 3 button controller or via custom push buttons as there is an extension included that will couple with the standard style push button power or reset switch...so if you're modding your pc you can make use of these to mount switches where you want them. Colours are very good and match well with the LED strips I have controlled from the ASUS Aura software. There's no control for brightness but I find the level of light just right. You can control the Mode [pulse, flash etc], Colour and Speed from the controller. These fans are brighter and throw the light further than the red LED Corsair ML fans they replace, as for noise, they are just as quiet as the MLs. I have this kit plus 2 extra fans and another on the way. I have them mounted in a Phanteks Ethoo Evolv ATX TG case, 2 at front over radiator, 2 on top of case and 1 rear exhaust with the extra one going on the top when it arrives; with the controller mounted on the back of the motherboard tray all the control cables make it to the control hub without issue. To clarify; each fan has 2 x 4 PIN cables, a standard 4 pin PWM fan plug to go to a motherboard fan header and a 4 pin connector that connects to the control hub, they are easily distinguished from one another.

Rated 4 out of 5 by dave2017 from Great Great lights, but in package to small screws provide, should be longer, i use my own screws, that why is 4 stars.

Rated 5 out of 5 by bill100 from Not only a good price They work well, and they add the edge to any good build, that is if it is going on show, if it is be locked away then standard ones will do,