Geekbuying’s $109, open-spec “GeekBox” mini-PC includes a removable SBC that runs Android and Ubuntu on an octa-core RK3368, and can plug into a carrier.



Here’s something new and different. Online tech retail site Geekbuying has launched a self-branded GeekBox media player mini-PC that features a removable, open source, open-spec single board computer. The GeekBox SBC, which includes a number of ports and dual WiFi-ac antennas, can then plug into an optional, $30 GeekBox Landingship carrier board with a MXM3 golden finger connector. The similarly open-spec Landingship contributes additional ports to turn the GeekBox board into a fully featured hacker SBC.







GeekBox (left) and opened to reveal removable SBC

(click images to enlarge)







GeekBox board plugging into GeekBox Landingship carrier board







GeekBox (left) and package contents, except for optional Landingship or display

(click images to enlarge)







Front and back detail views of GeekBox board

(click images to enlarge)







GeekBox Landingship (left) and detail view

(click images to enlarge)







GeekBox display connection (left) and appearance

(click images to enlarge)



Processor — Rockchip RK3368 (8x Cortex-A53 cores @ up to 1.5GHz); PowerVR 6110 GPU

Memory/storage: 2GB LPDDR3-1600 RAM 16GB Samsung eMMC 5.0 flash SD (TF) slot SATA slot for 2.5-inch drive (only on Landingship)

Display/multimedia: HDMI 2.0 port eDP interface Optional 7.9-inch, 2048 x 1536 capacitive touchscreen (via eDP) with Retina display MIPI-DSI connector (Landingship) MIPI-CSI, 20-pin, 1.27mm camera interface (Landingship) Audio headphone jack (Landingship) Audio S/PDIF port (Landingship) 2x mic inputs (Landingship) Video support — [email protected] decoding, 10-bit HEVC and AVS+ codec support; H.264 up to 4K 30Hz; HD MPEG1/2/4, H.265, 4K-HD, HD AVC/VC-1, RM/RMVB, Xvid/DivX3/4/5/6, RealVideo8/9/10 Audio support — MP3, WMA, AAC, WAV, OGG, AC3, DDP, TrueHD, DTS, DTS, HD, FLAC, APE

Wireless: 802.11a/b/g/n/ac 2×2 MIMO @ 867Mbps (Broadcom AP6354 module) Bluetooth 4.1 (AP6354) 2x antennas IR with remote (IR receiver also on Landingship) Optional 5dB WiFi booster antenna ($9.69)

Networking — gigabit Ethernet port

Other I/O: 2x USB 2.0 host ports Micro-USB OTG port Third USB host port (Landingship) UART (3x pins) for debug Fan and RTC headers 60-pin GPIO (Landingship)

Expansion: 314-finger MXM3 card edge connector on GeekBox board MXM3 socket on Landingship board

Other features – Reboot, update, power keys; LEDs on SBC and Landingship; RTC battery (Landingship); “2 x 2” user buttons and buzzer (Landingship); optional cooling fan

Power — 5V @ 2A DC with AC or DC adapter, charging cable; 5V DC in with over-voltage protection (Landingship)

Operating temperature — maximum of 56.3℃ without heat sink

Dimensions: GeekBox: Board — 82 x 56mm Enclosure — 90 x 69 x 21mm Landingship — 116 x 86 x 13mm

Operating system — Android 5.1 and Ubuntu Linux dual-boot with pre-installed Kodi; can also run Rockchip’s Android-based Light Biz OS

Making the GeekBox doubly cool is that it dual boots Android and Ubuntu on the octa-core, 64-bit Rockchip RK3368 SoC. When we first encountered the RK3368 in a shipping product — the Tronsmart Orion R68 media player mini-PC — back in June, there were relatively few details on the SoC, but Rockchip has now posted an RK3368 product page The 28nm fabricated RK3368 combines eight ARMv8 Cortex-A53 cores clocked at up to 1.5GHz. The SoC includes a top-of-the-line PowerVR 6110 GPU, supporting OpenGL ES 3.1, OpenCL 1.2, and DirectX 9.3. The RK3368 also supports the HDMI 2.0 standard, as well as 4Kx2K H2.64 and H.265 video @ 60fps.The 90 x 69 x 21mm GeekBox, which is pretty much the GeekBox board with a case, is equipped with 2GB LPDDR3 RAM, 16GB Samsung eMMC 5.0 flash, and an SD slot. There’s also a gigabit Ethernet port, and 802.11a/b/g/n/ac 2×2 MIMO, Bluetooth 4.1, with dual antennas. Interfaces include an HDMI 2.0 port, dual USB host ports (presumably 2.0), a micro-USB OTG port, and a serial debug interface. There’s also an eDP connector that hooks up to an optional, 7.9-inch, 2048 x 1536 capacitive touchscreen that sells for $68.When you remove the GeekBox board and plug it into the GeekBox Landingship carrier, you add a SATA slot, a third USB host port, and a 60-pin GPIO expansion connector. The Landingship also greatly expands the multimedia potential with S/PDIF and analog audio ports, dual mic inputs, a MIPI-CSI camera interface, and a MIPI-DSI display connector.The pre-installed, dual-boot Android 5.1 and Ubuntu Linux distributions can be hot-switched, and they come with a pre-installed version of the Kodi media player application. The GeekBox also supports Rockchip’s Android-based Light Biz OS , which is said to make Android work more like a desktop operating system, complete with multitasking windows.Specifications listed for the GeekBox, both in the media player chassis version, and with the SBC combined with the GeekBox Landingship, include:



Further information

The GeekBox is available for $110, discounted from a $214.80 retail price, or $140 when you include the optional $30 GeekBox Landingship carrier board. The optional 7.9-inch display costs $68. More information may be found at Geekbuying’s dedicated GeekBox site as well as the GeekBox product page and GeekBox promotional page.

