A wine stand in form of working, revolving planetary gear. A nice addition to your geeky room/kitchen.

I choose wood as it goes well with wine and fits my interior well. I guess that transparent acrylic glass would look great in modern decor.

The design is metric and uses 6 and 10mm thick parts. Assembly is easy once you have the lasercut parts ready. It took me ca. 2 hours of fun to put it together.

You can make one yourself or if you feel it is worth $99 you can get one by backing our Kickstarter campaign here

Parts needed:

6mm plywood (280mm x 670mm) - lasercut according to drawings

10mm plywood (1300mm x 540mm) - lasercut according to drawings

Aluminium or carbon (better) tube 10mm OD, 8mm ID, cut in 3x 40mm, 1x 60mm - get one in RC model shops

10x 51100 thrust bearing - any bearing shop will have them

M3 bolts - 24x 12mm, 6x 15mm, 75x 20mm, 9x 25mm, 12x 30mm, 8x 35mm, 18x 50mm

M3 nuts - 44x hex nut, 108x square nut

M8 bolts - 3x 50mm, 1x 90mm

M8 nuts - 2x hex nut,

3x self-locking (nylock) M8 hex nut

3x M8 washers 2mm thick