How I cross compiled Go to run on the Winkhub and installed a custom web app to control the lights locally.

TL;DR; Be sure to compile with Go 1.5 with the following settings:

GOOS=linux GOARCH=arm GOARM=5 go build .

After seeing that the Winkhub uses PHP for its server-side scripting, I decided to see if I could run Go on it instead. That way I could avoid writing new code in PHP and get a bit more practice at Go. I had noticed when the Winkhub first boots over the serial connection, one of the first items on the screen is the CPU information.

CPU: Freescale i.MX28 rev1.2 at 454 MHz

I wasn’t sure what this CPU’s architecture was, but after a quick search I figured out that it uses an ARM Processor. That gave me some hope that it was possible to compile Go for this platform.

I tried compiling a simple “hello world” program with the following command:

GOOS=linux GOARCH=arm go build .

I then copied the binary to the Winkhub and tried running it.

[root@flex-dvt ~]# ./helloworld runtime: this CPU has no floating point hardware, so it cannot run this GOARM=6 binary. Recompile using GOARM=5.

So I tried again with this:

GOOS=linux GOARCH=arm GOARM=5 go build .

No luck again!

[root@flex-dvt ~]# ./helloworld Illegal Instruction

I did a bit of searching and came across this issue. This post made me think I ran the correct compile steps. I attemped this a few more times and then I had a thought to try the Go 1.5RC. I upgraded to the RC build and then tried the previous build command again.

[root@flex-dvt ~]# ./helloworld Hello World

Boom! I was in business. So in the end the instructions are pretty simple:

Make sure to use Go 1.5.

Set the GOOS to linux

Architecture to arm

Use ARMv5 since the Winkhub does not have floating point support

GOOS=linux GOARCH=arm GOARM=5 go build .

I came up with a simple web service that allowed me to turn the lights on/off and adjust brightness. It is pretty basic right now, but I plan on adding other features such as a sleep timer and a time-of-day-based lighting schedule. I also plan to add support for door sensors that can trigger push notifications to my phone. The web service is broken into two parts. A server written in Go that runs on the Winkhub and a static client side JavaScript app which is served up from the Winkhub’s web server. This can be ran along side the existing built in PHP scripts if you wish to continue to use the existing scripts on there.

GopherWink setup instructions

screenshots here

Building from source requirements

Rooted Winkhub with SSH access

Go 1.5

NodeJS

ReactJS

Install from source

export WINK_IP_ADDRESS=X.X.X.X (replace the x’s with the Wink IP)

(replace the x’s with the Wink IP) git clone https://github.com/icecreammatt/gopherwink

git submodule init && git submodule update

cd frontend && npm install

make deploy

cd ..

make build

make install

Visit http://WINK_IP_ADDRESS/index.html to access the controls.

Install release manually

Download the release from here

Extract the zip file

export WINK_IP_ADDRESS=X.X.X.X (replace the x’s with the Wink IP)

(replace the x’s with the Wink IP) scp gopherwink root@$WINK_IP_ADDRESS:/root/gopherwink

scp S63gopherwink root@$WINK_IP_ADDRESS:/etc/init.d/S63gopherwink

scp index.html root@$WINK_IP_ADDRESS:/var/www

ssh root@$WINK_IP_ADDRESS "mkdir /var/www/assets

scp main.js root@$WINK_IP_ADDRESS:/var/www/assets/

ssh root@$WINK_IP_ADDRESS "/etc/init.d/S63gopherwink start"

Visit http://WINK_IP_ADDRESS/index.html to access the controls.

Usage notes

New devices for now need to be connected using aprontest or the WinkApp

Bugs

File bugs here

Future Plans

Improved UI to add and remove lights

Improved UI to rename devices

Add Proper support for GoControl Door Window Sensors

Sleep timer to keep light on for late nights

Snooze timer to turn on light after x minutes

Automatic brightness based on the time of day

TLS Authentication for API

License

GPLv3

This is the last part of a series of posts related to hacking the Winkhub

Screenshots