This graphics card is awesome! I had a bit of a problem fitting it as my case did not quite have enough distance between the card slot and the hard drive enclosure - the card is very long so beware. Anyway, after some minor mods to the case I had it installed and running. At first it did not recognise all of my monitors correctly. I have three 24 inch monitors all running the same resolution and with the main monitor (1) in the middle, with monitor 2 on the left and monitor 3 on the right. All three monitors are running from the display port connectors with a DVI active adaptor on each one. When first run up the graphics card did not allow one of the monitors to be set above 1280x1024 no matter what I tried. In the end I unplugged it from the card and then plugged it in again and everything was then correct. They all now run at 1920x1080 so I have loads of workspace. I also run an Oculus rift off the D HDMI port on the card. Previously I had used a 1060 and the VR software ran ok but could be a bit glitchy - not so with this card. The VR titles all run a lot better, they start faster and there is absolutely no jitter. I use the VR for flight sims (FSX, X-Plane 11 and DCS) as well as for driving games (Project Cars) and it is awesome. The titles in the Oculus VR library all run so much better too with frame rates of 90fps regularly achieved.