I got most of the materials from Home Depot save for the ball bearings and rollerblade wheel which I got from PlayItAgain Sports, but you can probably find some of these materials lying around.





*1 Bucket big enough for a Hedgehog to run in(I got my 5qt Wide Mouth Bucket from Home Depot, but you can use any bucket big enough for your hedgie to run on!)

1 length of the smaller diameter PVC Pipe(the diameter isn't too important; just not too thick, not too thin)

2 PVC Elbow Joints

3 PVC End Caps

1 PVC Three way joint

1 Roller Blade Wheel with exposed holes around the bearing whole.

1 Roller Blade/Skateboard Ball Bearing

1 Carriage Bolt; See Detailed Picture(I forgot the measurements of it, so take your Ball Bearing to your local hardware store and find a Carriage Bolt that fits snug, and isn't too short.) IMPORTANT!: Make sure that the nuts and bolt you got don't impede the spinning capabilities of the Ball Bearing, and have them only secured onto the inner metal ring.

2 Washers

3 Nuts

4 Mini Zip Ties



Optional, but Recommended:

Dremmel Tool, but if you have your own way of cutting PVC and making precise holes in the bucket, go for it.



*: If you don't have a hedgehog, you can use one of those mesh wheels for rats, and the plastic ones for hamsters and mice.